Scaffolds For Skin Tissue Engineering Research Articles

Retraction: Design and evaluation of ciprofloxacin loaded collagen chitosan oxygenating scaffold for skin tissue engineering (2021 Biomed. Mater. 16 025021)

Retraction: Design and evaluation of ciprofloxacin loaded collagen chitosan oxygenating scaffold for skin tissue engineering (2021 Biomed. Mater. 16 025021)

Enhancing wound regeneration potential of fibroblasts using ascorbic acid-loaded decellularized baby spinach leaves

AbstractDecellularization of plant tissues is an emerging route to fabricate scaffolds for tissue engineering and regenerative medicine. Although significant progress has been made in the field of plant tissue decellularization, functionalization of plant scaffolds is still an emerging field, and loading them with L-ascorbic acid to promote skin regeneration has not yet been reported. L-ascorbic acid is an antioxidant that plays a key role in collagen synthesis as a cofactor of lysyl hydroxylase and prolyl hydroxylase. It has been shown to have significant importance in physiological wound healing by stimulating fibroblasts to produce collagen at both the molecular and the genetic levels. In this work, we aimed to fabricate an ascorbic acid-releasing bioactive scaffold by introducing a stable form of ascorbic acid, L-ascorbic acid 2-phosphate (AA2P), into decellularized baby spinach leaves and investigated its biological activity in vitro. Our results demonstrated that AA2P could be easily introduced into decellularized baby spinach leaf scaffolds and subsequently released within the effective dose range. AA2P-releasing baby spinach leaves were found to increase metabolic activity and enhance collagen synthesis in L929 fibroblasts after 21 days. In conclusion, this study demonstrated the fabrication of a novel functionalized skin tissue engineering scaffold and made a significant contribution to the fields of plant decellularization and skin tissue engineering. Graphical abstract

Degradable and biocompatible nanofibrous scaffold incorporating a natural cell culture medium for skin tissue engineering

The use of green materials in biomedical and bioengineering applications has significantly expanded in recent years. In this study, we utilized egg white (EW) as an abundant and cost-effective green material, blended with polycaprolactone/gelatin (PCL/Gel), to fabricate an electrospun scaffold. The fabricated samples underwent comprehensive physicochemical characterization, including SEM, FT-IR spectroscopy, tensile assay, and contact angle measurement. These optimized samples were subsequently employed for cell culture experiments. The average diameter of the prepared nanofibers ranged from 215.9 to 434.1 nm. FT-IR and DSC assays confirmed the physical blending of EW, PCL, and Gel without any occurrence of new chemical reactions. The contact angle test demonstrated a decrease in scaffold hydrophilicity from 26.25° to 116.5° with an increase in EW content within the PCL/Gel blend (0%-15%). Notably, the electrospun PCL/Gel nanofibrous mat containing 10% EW exhibited enhanced bioactivity compared to other samples with varying amounts of EW. Consequently, incorporating 10% EW into PCL/Gel nanofibers can significantly improve the efficiency of fibroblast culture. This research introduces a novel nanofibrous scaffold for skin tissue engineering, incorporating Gel and EW as low-cost and readily available materials, with great potential for various biological applications.

Preparation, design, and characterization of an electrospun polyurethane/calcium chloride nanocomposite scaffold with improved properties for skin tissue regeneration

The present research paper explores the potential of electrospun nanofibers in the promising field of skin tissue engineering. Specifically, we propose an advanced preparation and characterization of an electrospun Polyurethane/Calcium Chloride (PU/CaCl2) nanocomposite scaffold, devised to boost the scaffold’s physicochemical and biological properties for skin tissue regeneration. By incorporating CaCl2 into the PU matrix using an electrospinning process, we were able to fabricate a novel nanocomposite scaffold. The morphological examination through Field Emission Scanning Electron Microscope (FESEM) revealed that the fiber diameter of the PU/CaCl2 (563 ± 147 nm) scaffold was notably smaller compared to the control (784 ± 149 nm). The presence of CaCl2 in the PU matrix was corroborated by Fourier-Transform Infrared Spectroscopy (FTIR) and Thermogravimetric Analysis (TGA). Furthermore, the PU/CaCl2 scaffold exhibited superior tensile strength (10.81 MPa) over pristine PU (Tensile −6.16 MPa, Contact angle - 109° ± 1° and Roughness - 854 ± 32 nm) and revealed enhanced wettability (72° ± 2°) and reduced surface roughness (274 ± 104 nm), as verified by Contact angle and Atomic Force Microscopy. The developed scaffold demonstrated improved anticoagulant properties, indicating its potential for successful integration within a biological environment. The improved properties of the PU/CaCl2 nanocomposite scaffold present a significant advancement in electrospun polymer nanofibers, offering a potential breakthrough in skin tissue engineering. However, additional studies are required to thoroughly evaluate the scaffold’s effectiveness in promoting cell adhesion, proliferation, and differentiation. We aim to catalyze significant advancements in the field by revealing the creation of a potent skin scaffold leveraging electrospun nanofibers. Encouraging deeper exploration into this innovative electrospun composite scaffold for skin tissue engineering, the PU/CaCl2 scaffold stands as a promising foundation for pioneering more innovative, efficient, and sustainable solutions in biomedical applications.

Innervation of an Ultrasound-Mediated PVDF-TrFE Scaffold for Skin-Tissue Engineering.

In this work, electrospun polyvinylidene-trifluoroethylene (PVDF-TrFE) was utilized for its biocompatibility, mechanics, and piezoelectric properties to promote Schwann cell (SC) elongation and sensory neuron (SN) extension. PVDF-TrFE electrospun scaffolds were characterized over a variety of electrospinning parameters (1, 2, and 3 h aligned and unaligned electrospun fibers) to determine ideal thickness, porosity, and tensile strength for use as an engineered skin tissue. PVDF-TrFE was electrically activated through mechanical deformation using low-intensity pulsed ultrasound (LIPUS) waves as a non-invasive means to trigger piezoelectric properties of the scaffold and deliver electric potential to cells. Using this therapeutic modality, neurite integration in tissue-engineered skin substitutes (TESSs) was quantified including neurite alignment, elongation, and vertical perforation into PVDF-TrFE scaffolds. Results show LIPUS stimulation promoted cell alignment on aligned scaffolds. Further, stimulation significantly increased SC elongation and SN extension separately and in coculture on aligned scaffolds but significantly decreased elongation and extension on unaligned scaffolds. This was also seen in cell perforation depth analysis into scaffolds which indicated LIPUS enhanced perforation of SCs, SNs, and cocultures on scaffolds. Taken together, this work demonstrates the immense potential for non-invasive electric stimulation of an in vitro tissue-engineered-skin model.

Resveratrol-loaded decellularized ovine pericardium: ECM introduced for tissue engineering.

An ideal scaffold for skin tissue engineering should have a suitable potential for antibacterial activity, no hemolysis, sufficient porosity for air exchange, water retention capacity, and a suitable swelling rate to maintain tissue moisture. Considering this issue, our study used decellularized ovine pericardial tissue's extracellular matrix (ECM). These scaffolds were decellularized with sodium dodecyl sulfate (SDS) and sodium deoxycholate (SD) detergents along with vacuum methods. Following imaging with scanning electron microscopy (SEM), analysis of the mechanical properties, and the measurement of the amount of DNA, collagen, and glycosaminoglycan (GAG), our study observed that the three-dimensional (3D) structure of ECM was largely preserved. Resveratrol (RES) 400µg/µL was loaded into the above scaffold, and analysis revealed that scaffolds containing RES and with vacuum reported higher antibacterial properties, a higher swelling rate, and increased water retention capacity. The biocompatibility and hemocompatibility properties of the above scaffolds also reported a significant difference between methods of decellularization.

In Vitro Cytocompatibility Assessment of Novel 3D Chitin/Glucan- and Cellulose-Based Decellularized Scaffolds for Skin Tissue Engineering

Background: Naturally derived sustainable biomaterials with high flexibility, mechanical properties, biocompatibility, and the ability to manipulate surface chemistry, providing a natural cellular environment, can be used for tissue engineering applications. However, only a few researchers have demonstrated the exploitation of natural architectures for constructing three-dimensional scaffolds. The chemical decellularization technique for fabricating natural scaffolds and their cytocompatibility assessment for tissue engineering applications need to be thoroughly explored and evaluated. Methods: Decellularization of natural scaffolds has been performed via a chemical method using anionic detergent sodium dodecyl sulfate (SDS) which was used for the in vitro culturing of murine embryonic NIH/3T3 fibroblasts. Techniques such as field-emission scanning electron microscopy (FE-SEM), compressive testing and swelling ratio, and biodegradation were performed to characterize the properties of fabricated decellularized natural scaffolds. Nucleic acid quantification, DAPI, and H&E staining were performed to confirm the removal of nuclear components. In vitro cytocompatibility and live/dead staining assays were performed to evaluate cultured fibroblasts’ metabolic activity and qualitative visualization. Results: 3D chitin/glucan- and cellulose-based scaffolds from edible mushroom (stem) (DMS) and unripe jujube fruit tissue (DUJF) were fabricated using the chemical decellularization technique. FE-SEM shows anisotropic microchannels of highly microporous structures for DMS and isotropic and uniformly arranged microporous structures with shallow cell cavities for DUJF. Both scaffolds exhibited good mechanical properties for skin tissue engineering and DUJF showed a higher compressive strength (200 kPa) than DMS (88.3 kPa). It was shown that the DUJF scaffold had a greater swelling capacity than the DMS scaffold under physiological conditions. At 28 days of incubation, DUJF and DMS displayed approximately 14.97 and 15.06% biodegradation, respectively. In addition, DUJF had greater compressive strength than DMS. Compared to DMS scaffolds, which had a compressive stress of 0.088 MPa at a 74.2% strain, the DUJF scaffolds had a greater compressive strength of 0.203 MPa at a 73.6% strain. The removal of nuclear DNA in the decellularized scaffolds was confirmed via nucleic acid quantification, DAPI, and H&E staining. Furthermore, both of these scaffolds showed good adherence, proliferation, and migration of fibroblasts. DMS showed better biocompatibility and high viability of cells than DUJF. Conclusions: This sustainable scaffold fabrication strategy is an alternative to conventional synthetic approaches for the in vitro 3D culture of mammalian cells for various tissue engineering and cultured meat applications.

Investigation of human hair keratin-based nanofibrous scaffold for skin tissue engineering application.

Keratin-based nanofibers were fabricated using the electrospinning technique, and their potential as scaffolds for tissue engineering was investigated. Keratin, extracted from the human hair, was blended with poly(vinyl alcohol) (PVA) in an aqueous medium. Morphological characterizations of the fabricated PVA-keratin nanofiber (PK-NF) random and aligned scaffolds performed using a scanning electron microscope (SEM) revealed the formation of uniform and randomly oriented nanofibers with an interconnected three-dimensional network structure. The mean diameter of the nanofibers ranged from 100 to 250nm. Functional groups and structural studies were done by infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis. FTIR study suggested that PVA interacted with keratin by hydrogen bonding. Moreover, the in vitro cell culture study could suggest that PK-NF scaffolds were non-cytotoxic by supporting the growth of murine embryonic stem cells (ESCs), human keratinocytes (HaCaT), and dermal fibroblast (NHDF) cell lines. Further, the immunocytochemical characterization revealed the successful infiltration, adhesion, and growth of ESCs, HaCaT, and NHDF cells seeded on PK-NF scaffolds. However, there was no noteworthy difference observed concerning cell growth and viability irrespective of the random and aligned internal fibril arrangement of the PK-NF scaffolds. The infiltration and growth pattern of HaCaT and NHDF cells adjacent to each other in a 3D co-culture study mimicked that of epidermal and dermal skin cells and indeed underscored the potential of PK-NFs as a scaffold for skin tissue engineering.

Polydopamine-Functionalized Bacterial Cellulose as Hydrogel Scaffolds for Skin Tissue Engineering.

Bacterial cellulose (BC) is a natural polysaccharide polymer hydrogel produced sustainably by the strain Gluconacetobacter hansenii under static conditions. Due to their biocompatibility, easy functionalization, and necessary physicochemical and mechanical properties, BC nanocomposites are attracting interest in therapeutic applications. In this study, we functionalized BC hydrogel with polydopamine (PDA) without toxic crosslinkers and used it in skin tissue engineering. The BC nanofibers in the hydrogel had a thickness of 77.8 ± 20.3 nm, and they could be used to produce hydrophilic, adhesive, and cytocompatible composite biomaterials for skin tissue engineering applications using PDA. Characterization techniques, namely Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and Raman spectroscopy, were performed to investigate the formation of polydopamine on the BC nanofibers. The XRD peaks for BC occur at 2θ = 14.65°, 16.69°, and 22.39°, which correspond to the planes of (100), (010), and (110) of cellulose type Iα. Raman spectroscopy confirmed the formation of PDA, as indicated by the presence of bands corresponding to the vibration of aromatic rings and aliphatic C-C and C-O stretching at 1336 and 1567 cm-1, respectively. FTIR confirmed the presence of peaks corresponding to PDA and BC in the BC/PDA hydrogel scaffolds at 3673, 3348, 2900, and 1052 cm-1, indicating the successful interaction of PDA with BC nanofibers, which was further corroborated by the SEM images. The tensile strength, swelling ratio, degradation, and surface wettability characteristics of the composite BC biomaterials were also investigated. The BC/PDA hydrogels with PDA-functionalized BC nanofibers demonstrated excellent tensile strength and water-wetting ability while maintaining the stability of the BC fibers. The enhanced cytocompatibility of the BC/PDA hydrogels was studied using the PrestoBlue assay. Culturing murine NIH/3T3 fibroblasts on BC/PDA hydrogels showed higher metabolic activity and enhanced proliferation. Additionally, it improved cell viability when using BC/PDA hydrogels. Thus, these BC/PDA composite biomaterials can be used as biocompatible natural alternatives to synthetic substitutes for skin tissue engineering and wound-dressing applications.

The fabrication and characterization of a novel antibacterial curcumin and TiO2 loaded gelatin/silk fibroin: polycaprolactone scaffolds for skin tissue engineering

Skin injuries are common problems and large skin defects or infected skin needs extra attention that make the researchers find new solutions. Herein, a novel biocompatible, biodegradable antibacterial scaffold containing gelatin, TiO2, polycaprolactone, and silk fibroin loaded with different ratios of curcumin (0.5, 1, and 1.5% wt.) was fabricated with electrospinning technique and was tested with various in vitro tests. The cellular investigations (cell adhesion, cell viability, and in vitro migration test) and antibacterial assay revealed the higher efficiency of the scaffold with 1% wt. curcumin and further investigation were performed on this scaffold. The morphological observation confirmed the nanofibrous structure of the scaffold, with 0.10 ± 0.015 μm average fiber diameter. This scaffold showed hydrophilic nature with high swelling ratio absorption and 76.45 ± 5.19% degradation ratio after 2 weeks. Also, it could provide adequate mechanical properties for skin regeneration. The drug-releasing investigation revealed Cur’s controlled release over 48 h. Therefore, this biocompatible and antibacterial scaffold showed high potential for treating skin injuries and is suggested for future in vivo studies.

Preparation and characterization of sodium alginate/Antarctic krill protein/Genipin scaffold for skin tissue engineering

In this study, sodium alginate (SA)/Antarctic krill protein(AKP)/Genipin (GP) scaffold was obtained by freeze-drying, in which Antarctic krill protein was used as enhanced the cell adsorption activity of the materials; GP and Ca2+, which have very low cytotoxicity, were selected to cross-link AKP and SA in steps, the interpenetrating network structure of “covalent cross-linking-ion complex-hydrogen bonding” was finally constructed. By changing the content of GP, the structure, surface morphology, mechanical properties, water absorption, water retention, and cytotoxicity of the scaffold were studied using FTIR, SEM, and other test methods. The results showed that the pore area of the prepared SA/AKP/GP scaffolds exhibited an increase and then a decrease with the increase of GP content; the fracture strength and elongation at break exhibited an increase and then a decrease with the increase of GP content. The breaking strength and elongation at break achieved their maximum values of 32.9 MPa and 4.43% when the content of GP hit 0.8%; The scaffold had good water absorption and water retention; The cytotoxicity grade of the scaffold was grade 0, and the addition of AKP made the fibroblasts have good growth and proliferation ability on the scaffold.

3D bioprinted scaffolds based on functionalized gelatin for soft tissue engineering

3D bioprinting application in the medical field requires optimized and adapted bioinks/biomaterials, along with processing as scaffolds with morphology and structure that mimic human tissues. Various polymeric hydrogels have been tested in bioinks elaboration in order to support the cells biology. In this context, the paper presents the preparation of versatile bioadhesive hydrogels based on methacrylated gelatin, moderate crosslinked with poly (ethylene glycol) diacrylate, and 3D bioprinted as bioadhesive scaffolds for skin tissue engineering. Gelatin with various methacrylation degrees, confirmed by FTIR and H1NMR and analytical methods (TNBS, nynhydrin assay), mixed with poly (ethylene glycol) diacrylate and biocompatible photoinitiator led to stable gels, with rheological characteristics (yield stress and shear-thinning behavior) beneficial for bioprinting. Scaffolds with controllable shape and morphology have been obtained by bioprinting and polymers UV crosslinking. The 3D scaffolds absorb fluids and their biostability increases in presence of poly (ethylene glycol) diacrylate. Cell cultures of fibroblasts/ keratinocytes demonstrated the scaffolds cytocompatibility. The cells preserved the normal morphology, were adherent to substrate and formed uniform monolayers. The bioadhesion characteristics increased by adding poly (ethylene glycol) diacrylate as macromolecular crosslinker. The scaffolds absorb the blood plasma, promote the local accumulation of fibrinogen, and accelerate the adhesion of the blood components, with impact on angiogenesis, suitability characteristic for skin tissue engineering applications.

Design, optimization and characterization of a novel antibacterial chitosan-based hydrogel dressing for promoting blood coagulation and full-thickness wound healing: A biochemical and biophysical study

The use of hydrogel dressings has become increasingly popular as a scaffold for skin tissue engineering. Herein, we have developed an innovative wound dressing using chitosan, fibrinogen, nisin, and EDTA as an effective antibacterial scaffold for wound treatment. The structural and functional characteristics of the hydrogel, including morphology, mechanical strength, drug encapsulation and release, swelling behaviors, blood coagulation, cytotoxicity, and antibacterial activity, were studied. Spectroscopic studies indicated that the attachment of chitosan to fibrinogen is associated with minimal change in its secondary structure; subsequently, at higher temperatures, it is expected to preserve fibrinogen's conformational stability. Mechanical and blood coagulation analyses indicated that the incorporation of fibrinogen into the hydrogel resulted in accelerated clotting and enhanced mechanical properties. Our cell studies showed biocompatibility and non-toxicity of the hydrogel along with the promotion of cell migration. In addition, the prepared hydrogel indicated an antibacterial behavior against both Gram-positive and Gram-negative bacteria. Interestingly, the in vivo data revealed enhanced tissue regeneration and recovery within 17 days in the studied animals. Taken together, the results obtained from in vitro and histological assessments indicate that this innovatively designed hydrogel shows good potential as a candidate for wound healing.

Fabrication of Fibrin/Polyvinyl Alcohol Scaffolds for Skin Tissue Engineering via Emulsion Templating

In the search for a novel and scalable skin scaffold for wound healing and tissue regeneration, we fabricated a class of fibrin/polyvinyl alcohol (PVA) scaffolds using an emulsion templating method. The fibrin/PVA scaffolds were formed by enzymatic coagulation of fibrinogen with thrombin in the presence of PVA as a bulking agent and an emulsion phase as the porogen, with glutaraldehyde as the cross-linking agent. After freeze drying, the scaffolds were characterized and evaluated for biocompatibility and efficacy of dermal reconstruction. SEM analysis showed that the formed scaffolds had interconnected porous structures (average pore size e was around 330 µm) and preserved the nano-scale fibrous architecture of the fibrin. Mechanical testing showed that the scaffolds' ultimate tensile strength was around 0.12 MPa with an elongation of around 50%. The proteolytic degradation of scaffolds could be controlled over a wide range by varying the type or degree of cross-linking and by fibrin/PVA composition. Assessment of cytocompatibility by human mesenchymal stem cell (MSC) proliferation assays shows that MSC can attach, penetrate, and proliferate into the fibrin/PVA scaffolds with an elongated and stretched morphology. The efficacy of scaffolds for tissue reconstruction was evaluated in a murine full-thickness skin excision defect model. The scaffolds were integrated and resorbed without inflammatory infiltration and, compared to control wounds, promoted deeper neodermal formation, greater collagen fiber deposition, facilitated angiogenesis, and significantly accelerated wound healing and epithelial closure. The experimental data showed that the fabricated fibrin/PVA scaffolds are promising for skin repair and skin tissue engineering.

Design and development of polydioxanone scaffolds for skin tissue engineering manufactured via green process

Fiber spinning technologies attracted a great interest since the beginning of the last century. Among these, electrospinning is a widely diffuse technique; however, it presents some drawbacks such as low fiber yield, high energy demand and the use of organic solvents. On the contrary, centrifugal spinning is a more sustainable method and allows to obtain fiber using centrifugal force and melted materials. The aim of the present work was the design and the development of polydioxanone (PDO) microfibers intended for tissue engineering, using centrifugal spinning. PDO, a bioresorbable polymer currently used for sutures, was selected as low melting polyester and DES (deep eutectic solvents), either choline chloride/citric acid (ChCl/CA) or betaine/citric acid (Bet/CA) 1:1 M ratio, were used to improve PDO spinnability. Physical mixtures of DES and PDO were prepared using different weight ratios. These were then poured into the spinneret and melted at 140 °C for 5 min. After the complete melting, the blends were spun for 1 min at 700 rpm. The fibers were characterized for physico chemical properties (morphology; dimensions; chemical structure; thermal behavior; mechanical properties). Moreover, the preclinical investigation was performed in vitro (biocompatibility, adhesion and proliferation of fibroblasts) and in vivo (murine burn/excisional model to assess safety and efficacy). The multidisciplinary approach allowed to obtain an extensive characterization to develop PDO based microfibers as medical device for implant to treat full thickness skin wounds.

Designing biomimetic scaffolds for skin tissue engineering.

There is a general increase in the number of patients with non-healing skin wounds, imposing a huge social and economic burden on patients and healthcare systems. Severe skin injury is an important clinical challenge. There is a lack of skin donors, and skin defects and scarring after surgery can lead to impaired skin function and skin integrity. Researchers worldwide have made great efforts to create human skin organs but are limited by the lack of key biological structural features of the skin. Tissue engineering repairs damaged tissue by incorporating cells into biocompatible and biodegradable porous scaffolds. Skin tissue engineered scaffolds not only have appropriate physical and mechanical properties but also exhibit skin-like surface topography and microstructure, which can promote cell adhesion, proliferation, and differentiation. At present, skin tissue engineering scaffolds are being developed into clinical applications that can overcome the limitations of skin transplantation, promote the process of wound healing, and repair skin tissue damage. This provides an effective therapeutic option for the management of patients with skin lesions. This paper reviews the structure and function of skin tissue and the process of wound healing, and summarizes the materials and manufacturing methods used to fabricate skin tissue engineering scaffolds. Next, the design considerations of skin tissue engineering scaffolds are discussed. An extensive review of skin scaffolds and clinically approved scaffold materials is presented. Lastly, some important challenges in the construction of skin tissue engineering scaffolds are presented.

Novel Electrospun Polycaprolactone/Calcium Alginate Scaffolds for Skin Tissue Engineering

After decades of research, fully functional skin regeneration is still a challenge. Skin is a multilayered complex organ exhibiting a cascading healing process affected by various mechanisms. Specifically, nutrients, oxygen, and biochemical signals can lead to specific cell behavior, ultimately conducive to the formation of high-quality tissue. This biomolecular exchange can be tuned through scaffold engineering, one of the leading fields in skin substitutes and equivalents. The principal objective of this investigation was the design, fabrication, and evaluation of a new class of three-dimensional fibrous scaffolds consisting of poly(ε-caprolactone) (PCL)/calcium alginate (CA), with the goal to induce keratinocyte differentiation through the action of calcium leaching. Scaffolds fabricated by electrospinning using a PCL/sodium alginate solution were treated by immersion in a calcium chloride solution to replace alginate-linked sodium ions by calcium ions. This treatment not only provided ion replacement, but also induced fiber crosslinking. The scaffold morphology was examined by scanning electron microscopy and systematically assessed by measurements of the pore size and the diameter, alignment, and crosslinking of the fibers. The hydrophilicity of the scaffolds was quantified by contact angle measurements and was correlated to the augmentation of cell attachment in the presence of CA. The in vitro performance of the scaffolds was investigated by seeding and staining fibroblasts and keratinocytes and using differentiation markers to detect the evolution of basal, spinous, and granular keratinocytes. The results of this study illuminate the potential of the PCL/CA scaffolds for tissue engineering and suggest that calcium leaching out from the scaffolds might have contributed to the development of a desirable biological environment for the attachment, proliferation, and differentiation of the main skin cells (i.e., fibroblasts and keratinocytes).

New skin tissue engineering scaffold with sulfated silk fibroin/chitosan/hydroxyapatite and its application

Repairing skin wounds has always been challenging in clinical practice. The new skin tissue engineering scaffold provides innovative ways to address these challenges with a good chance of success because of its stable mechanical properties, biodegradability, and antibacterial properties. This paper presents the fabrication and evaluation of a three-dimensional composite scaffold made with sulfated silk fibroin, chitosan, and hydroxyapatite (SSF/CS/HAP). An electron microscope shows that the scaffold has an aperture of 15–20 μm, while an absorption performance test shows that its expansion index reaches 779%. The co-culture of L929 cells and the CCK-8 experiments demonstrated good cell compatibility and low scaffold cytotoxicity, respectively. Meanwhile, in vivo experiments demonstrate that rats with SSF/CS/HAP scaffold-treated neck wounds heal faster. In the wound skin tissue of the SSF/CS/HAP scaffold group, immunohistochemistry indicates a more rapid and mature development of hair follicles. This study successfully developed a novel skin tissue engineering scaffold material with high moisture retention, high tissue compatibility, and low cytotoxicity, demonstrating its ability to improve wound repair with promising potential for tissue engineering applications.

Synthesis and Characterization of PU/PLCL/CMCS Electrospun Scaffolds for Skin Tissue Engineering.

As tissue regeneration material, electrospun fibers can mimic the microscale and nanoscale structure of the natural extracellular matrix (ECM), which provides a basis for cell growth and achieves organic integration with surrounding tissues. At present, the challenge for researchers is to develop a bionic scaffold for the regeneration of the wound area. In this paper, polyurethane (PU) is a working basis for the subsequent construction of tissue-engineered skin. poly(L-lactide-co-caprolactone) (PLCL)/carboxymethyl chitosan (CMCS) composite fibers were prepared via electrospinning and cross-linked by glutaraldehyde. The effect of CMCS content on the surface morphology, mechanical properties, hydrophilicity, swelling degree, and cytocompatibility were explored, aiming to assess the possibility of composite scaffolds for tissue engineering applications. The results showed that randomly arranged electrospun fibers presented a smooth surface. All scaffolds exhibited sufficient tensile strength (5.30-5.60 MPa), Young's modulus (2.62-4.29 MPa), and swelling degree for wound treatment. The addition of CMCS improved the hydrophilicity and cytocompatibility of the scaffolds.

One-Step Preparation of Carboxymethyl Cellulose-Phytic Acid Hydrogels with Potential for Biomedical Applications.

Hydrogels based on natural, biodegradable materials have gained considerable interest in the medical field due to their improved drug delivery profiles and tissue-mimicking architecture. In this regard, this study was devoted to the preparation and characterization of new physically crosslinked hydrogels based on carboxymethyl cellulose and an unconventional crosslinking agent, phytic acid. Phytic acid, in addition to its antioxidant and antibacterial effects, can improve the biological properties and stability of gels, without adding toxicity. Fourier transform infrared (FTIR) spectroscopy, rheological studies and thermal analysis confirmed the hydrogel formation. The influence of the ratio between the cellulose derivative and the crosslinker upon the morphological structure and water uptake was evidenced by scanning electron microscopy (SEM) and swelling measurements in simulated body fluids. Furthermore, procaine was entrapped within the hydrogels and used as a model drug for in vitro studies, which highlighted the dependence of the drug release on the phytic acid content of the matrix. The materials demonstrated antibacterial effects against Escherichia coli and Staphylococcus aureus bacteria. The biocompatibility was assessed on fibroblast cells, and according to our results, hydrogels can improve cell viability highlighting the potential of these systems as therapeutic scaffolds for skin tissue engineering.